Home :: Internal Sealers :: Eco Friendly Low Sheen

Eco Friendly Low Sheen

Eco Friendly Low Sheen

An Environmentally friendly sealer that is suitable for paving, concrete, stone, slate, masonry and most unglazed surfaces producing a very attractive low/medium sheen finish

AdSeal ‘Eco Friendly Satin finish’

AdSeal ‘Eco Friendly ‘ is designed to give an attractive low to edium sheen and be environmentally friendly offering outstanding results on unglazed surfaces such as Marble, Stone, Slate, Travetine, Terracotta, Clay tiles/pavers and also on Engineered stone.

Environmentally friendly

A ready to use special water based product which is virtually odour free. Designed for a single coat application leaving a low sheen finish.

AdSeal ‘Eco Friendly ’ prevents staining and facilitates routine maintenance plus it has very little effect on the slip resistance of the surface. Developed by our own design team and consultant organic chemists, this fantastic product offers ease of installation with excellent performance and longevity and is ideal for use as:

  • Natural Stone sealer
  • Slate sealer and slate tile sealer
  • Marble, limestone sealer
  • Terracotta and travertine sealer
  • and for most natural paving
  • also engineered paving products such as Marshalls, Bradstone, etc.
  • Wall and floor surfaces
  • Stairs and Terraces, etc.
  • Kitchen and conservatory floors
  • Can be used indoors or outdoor

if you require a truly matt, invisible finish we recommend AdSeal InvisiSeal
for a Colour enhancing matt/sheen, we recommend AdSeal Colour Enhancer


  • Limited effect on slip resistance of the treated surface
  • Hygienic – stains just wash away
  • Easily re-coatable and does NOT need stripping
  • 100% UVA and fade resistant and can be used internally or externally
  • Increases impact, abrasion and chemical resistance for increased life span
  • Excellent coverage. Approx 10 m2 per litre depending on surface porosity
  • Supplied in 500ml, 1 litre and 5 litre containers


Indoors and lightly trafficked areas, with correct maintenance and depending upon surface type, potentially 10 years plus. Externally colour will remain for 1 – 2 years although protective effect will remain for longer, potentially 4 – 6 years, depending upon surface type.

Fading of the colour and reduction in protective effect take place more rapidly in heavily trafficked areas and these areas can be easily ‘touched up’ without the need to strip the original coat. Lower trafficked areas will only need retreating very occasionally.


Sweep regularly to remove abrasive dirt and grit from surface and mop daily using a mild detergent. Spills and marks should be wiped up as soon as possible and not allowed to dry on.

Should signs of wear appear a Maintenance coat can be applied. Clean and thoroughly dry surface to be treated. Apply single ‘tight’ coat in accordance with standard application instructions. There is no need to strip unless resin build up or blemishes are an issue.

Support and Tech Info:

We are more than happy to share our extensive practical and technical knowledge and expertise with you. Whether you are sealing for the first time, an experienced installer or a Specifier with a technical query, please call us on 01204 362828 or email enquiries@advancedsealingsolutions.co.uk We are here to help


Eco Acid
Nanoset Colour